CELL2254G LTE CAT1 Cellular Module for Japan

CELL225是一种工业4 g LTE手机模块e. It requires at least one micro-SIM 3FF card (for six position/contacts interface) supplied by your cellular carrier and a suitable 12 or 24 Vdc nominal power source. The CELL225 has an RS-232 serial port and a CS I/O port that can be used for serial server, serial client, and PPP host services. These ports are commonly connected to a data logger RS-232 serial or CS I/O port. The CELL225 has two antenna connectors to be used for primary and diversity antennas, although the unit can operate with only the primary cellular antenna connected.

Internet Connectivity

这CELL225 provides Internet connectivity to any Campbell Scientific data logger located within range of a compatible cellular network. Armed with Internet connectivity, a data logger can remotely connect to Campbell Scientific software on a PC, mobile device, and the cloud. The CELL225 can also enable many data loggers to communicate using other Internet protocols, such as Modbus, DNP3, email, and web (HTTP).

Device Intelligence

这CELL225 provides highly reliable connectivity and remote device management independent of the device it is connected to. The numerous embedded services include IP serial server and client.

建立蜂窝服务

Campbell Scientific为Cell225提供了低成本的蜂窝数据服务计划。我们的数据服务计划包括美国的Verizon和北美的AT＆T（美国，墨西哥，加拿大），以及在185个国家 /地区获得600多名运营商的国际访问权限。这Konect routing serviceis included to assure a secure connection with Campbell Scientific data logger support software.

这CELL225 can also be configured directly from the data logger when used in PPP mode (default mode) using theDevice Configuration Utility或CRBASIC说明。

Data Logger Connection

Data loggers can be connected in a variety of ways to suit the needs of the application. Common methods include the use of serial or CS I/O cables.

Powering the CELL225

Compared to many other industrial cellular modules, the CELL225 has extremely low power consumption. The average current consumption at 12 Vdc is approximately 14 mA when idle, depending on its configuration. Additionally, the CELL225 can be turned on and off easily using a data logger SW12V port or theIPNetPower()instruction (PPP mode for the CR1000X, CR300, and CR6 only). When using the SW12V terminal, the modem can typically be powered with aBP12 battery, aCH150 charging regulator, and anSP10 solar panel.

Antennas

Campbell Scientific offers three antennas for the CELL225. Our 4G/3G/2G 0 dBd cellular dipole whip antenna (pn 32256) connects directly to the CELL225 (no cable required) and can transmit short distances. Our higher gain omnidirectional (pn 18285) and Yagi (pn 31128) antennas require a cable to connect them to the CELL225. TheCOAXSMA-L cableconnects the antennas directly to the CELL225 cellular antenna connector. TheCOAXNTN-L cableand a surge protector (pn 31317当Cell225易受闪电或静电堆积或长时间运行时，使用）。

Sample Programs

• View thissample programfor how to use some of the terminal commands with CELL2XX modules.
• To use the SetSettings functionality with the CR300, CR310, CR6, and CR1000X dataloggers, view thissample program.