Barovue10数字晴雨表

Expand AllCollapse All

1. 如何重新校准Barovue™10？

   Contact your local Campbell Scientific office to purchase a calibrated BaroVUE™10 sensor card (BVC10). After you receive the calibrated card, swap it with your current card, and mail it back to your local Campbell Scientific office. In this way, only one trip to the field site is required, and there will be no downtime for the sensor.

2. 如果Barovue™10在捷径程序中不可选择，如何添加它？

   It is possible that an older version of Short Cut is being used. Download the latest version of Short Cut.

3. Barovue™10中使用的乘数和偏移值是什么？

   When using SDI-12 or RS-232 communication protocols, the pressure measurement can be returned in hPa, kPa, mmHg, inHg, or PSI. Refer to the BaroVUE™10手动佛r more information. If different measurement units are required, refer to a conversion chart.

4. How often should the BaroVUE™10 be factory calibrated?

   Campbell Scientific recommends calibration on a yearly basis. However, conformance to published standards or regulations may require this on a more frequent basis.

5. Barovue™10是CS106和CS100的直接替换吗？

   虽然测量值等效，但Barovue™10不是替换。与CS100和CS106不同，Barovue™10 is a digital sensor that communicates either via SDI-12 or RS-232. To use the BaroVUE™10在先前使用CS100/CS106的系统中，将需要更改接线和程序，因为它是数字传感器。

6. What are the features and benefits of the BaroVUE™10?

   Zero downtime/recalibration

   The BaroVUE™10 has been designed to allow for zero downtime recalibration during normal use. Other sensors on the market need to be taken offline and sent back to the manufacturer to be recalibrated, often for weeks at a time, resulting in loss of data and costing time and money.

   相比之下，Barovue的传感器卡™10进行校准，并发送给客户以更换旧的传感器卡，只需要一次前往现场的旅行，而无需停机时间。

   Further to this, the design of the BaroVUE™10允许客户快速轻松地卸下和更换其传感器卡，而无需拆卸外壳中的设备或必须将产品发送回制造商。无需关闭设备即可更换卡。

   Highly reliable measurements

   The BaroVUE™10 sensor card employs multiple sensor cells with statistical analysis to produce an accurate, precise, and repeatable measurement as well as a data-quality metric. The customer can use this quality metric for tracking calibration cycles, planning, maintenance schedules, and detecting pre-fault conditions.

   Low power

   The BaroVUE™10是一个低功率设备和可以保持运行continuously. The BaroVUE™10 does not require any power cycling, unlike other products in this category.

   Very low noise

   The BaroVUE™10使用直接到数字的传感器，并且气压计内部没有进行类似于数字的转换。

   与模拟传感器相比，这些因素与多个传感器单元相结合，导致噪声减少。

   Campbell Scientific aesthetics and form

   The BaroVUE™10的设计考虑到了功能，其美学补充了其他坎贝尔科学产品。

   The BaroVUE™10可以安装在最适合应用程序的方向上，并且比其竞争对手具有更小的背板足迹。

7. Does the BaroVUE™10 fit inside an ENC100 enclosure?

   The BaroVUE™10可以安装在ENC100内。有关更多信息，请参阅有关的规格信息ENC100product page.

8. What is the warm-up time for the BaroVUE™10?

   There is no warm-up time for the BaroVUE™10.

9. What is purpose of the quality metric for the BaroVUE™10?

   The quality metric is a unique diagnostic feature that indicates the quality of the pressure measurement returned by the sensor card (BVC10). It enables the user to monitor the health of their sensor to better schedule recalibrations.

   Quality Metric Range	Description	Comments
   > 6	Sensor freshly calibrated
   5 to 5.99	传感器工作良好
   4至4.99	在两到三个月内，该传感器将需要重新校准。	Within three months, send the BaroVUE™10的工厂校准。
   0 to 3.99	Recalibrate the sensor now.	As soon as possible, send the BaroVUE™10的工厂校准。

10. Can the BaroVUE™10 be used to measure pressure in an application at very high humidity without damaging the sensor?

    Yes, but only if certain conditions are met:

    • The sensor must reside in a non-condensing environment.
    • The vent tube accessing the high-humidity environment must be extremely well desiccated to keep any moisture from reaching the sensor’s components. Moisture in the sensor will damage the sensor, often to an un-repairable state.