适用于海洋应用
Overview
The 05108-HD is a lightweight, robust instrument that measures wind speed and direction, designed specifically for your applications where sensor access is limited and conditions are rough. Manufactured by R. M. Young, this wind monitor is cabled for use with Campbell Scientific data loggers.
Read MoreBenefits and Features
- 与大多数坎贝尔科学数据记录器兼容
- 极其长磨损，耐腐蚀，超大陶瓷轴承，增加了比标准不锈钢轴承长多次的使用寿命
- Oversized propeller shaft
- 高地螺旋桨
- 锁定螺旋桨坚果
- 密封，重型电缆辫子
- 足够恶劣的环境
- Constructed with thermoplastic material that resists corrosion from sea-air environments and atmospheric pollutants
- 兼容LLAC4 4通道低级交流转换模块，其增加了一个数据记录器可以测量的风速计数量
- 兼容CWS900系列接口，允许其用于无线传感器网络
The "-L" on a product model indicates that the cable length is specified at the time of order.
Images
类似产品
Detailed Description
05108风监控器-HD由刚性UV稳定的热塑性塑料制成，具有不锈钢和阳极氧化铝配件。热塑性材料抵抗海洋环境和大气污染物的腐蚀。
To make it more durable, the HD uses extremely long-wearing, oversized ceramic bearings to increase service life many times longer than standard stainless-steel bearings. The wind monitor's ceramic bearings are resistant to corrosion in environments that are hostile to steel bearings, making the 05108-L suitable for marine applications. The HD also has an oversized propeller shaft, high-pitch propeller, locking propeller nut, and sealed, heavy-duty cable pigtail instead of the standard junction box—all features that further enhance the long-term reliability of the sensor.
05108用螺旋形的四刀片螺旋桨测量风速。螺旋桨的旋转产生交流电波，其具有与风速成正比的频率。通过安装在螺旋桨轴上的六极磁铁在换能器线圈中引起交流信号。线圈驻留在主安装组件的非旋转中心部分上，消除了对滑环和刷子的需要。
通过机身形状的传感器主体的方向来感测风向，该传感器主体连接到内部电位器。数据记录器将已知的精密激励电压应用于电位计元件。输出是与方位角成比例的模拟电压信号。
Specifications
| Applications |
|
| Sensor | Helicoid-shaped, 4-blade propeller and fuselage-shaped sensor body |
| Measurement Description | 风速和方向 |
| Operating Temperature Range | -50°至+ 60°C（假设非升高条件） |
| 安装管道描述 |
|
| 外壳直径 | 5厘米（2.0英寸） |
| Propeller Diameter | 18 cm (7.1 in.) |
| 高度 | 37 cm (14.6 in.) |
| Length | 55 cm (21.7 in.) |
| Weight | 1.0千克（2.2磅） |
风速 |
|
| 范围 | 0 to 100 m/s (0 to 224 mph) |
| 准确性 | ±0.3 m/s (±0.6 mph) or 1% of reading |
| 起始门槛 | 1.0 m/s (2.2 mph) |
| Distance Constant | 2.7米（8.9英尺）恢复63％ |
| Output | 交流电压（每次旋转3个脉冲） 1800rpm（90 hz）= 14.9 m / s（33.3英里/小时） |
| 解决 | (0.1666 m/s)/(scan rate in seconds)要么（0.3726英里/小时）/（在秒内扫描速率） |
Wind Direction |
|
| Mechanical Range | 0 to 360° |
| Electrical Range | 355° (5° open) |
| 准确性 | ±3° |
| 起始门槛 | 1.0 m/s (2.2 mph) at 10° displacement |
| Distance Constant | 1.3 m (4.3 ft) 50% recovery |
| Damping Ratio | 0.25 |
| Damped Natural Wavelength | 7.4米（24.3英尺） |
| 天然波长无透明的自然波长 | 7.2 m (23.6 ft) |
| Output |
|
| 电压 | Power switched excitation voltage supplied by data logger |
Compatibility
Note:以下显示了显着的兼容性信息。它不是所有兼容或不兼容产品的全面列表。
Data Loggers
| Product | Compatible | Note |
|---|---|---|
| 21X.(retired) | ||
| CR10(retired) | ||
| CR1000.(retired) | ||
| CR1000.X | ||
| CR10X(retired) | ||
| CR200x.(retired) | ||
| CR206X(retired) | ||
| CR211x.(retired) | ||
| CR216X(retired) | ||
| CR23X(retired) | ||
| CR300. | ||
| CR300.0(retired) | ||
| CR310 | ||
| CR350 | ||
| CR500.(retired) | 通常对测量进行处理，用于用风向量指令输出，该指令不存在于CR500中。 | |
| CR500.0(retired) | ||
| CR510(retired) | ||
| CR6. | ||
| CR800 | ||
| CR850 | ||
| CR9000(retired) | Measurements are typically processed for output with the Wind Vector instruction, which is not present in the CR9000. | |
| CR9000x.(retired) |
额外的兼容性信息
安装
通过17953 Nu轨道交叉配件或CM220直角安装支架，05108-L可以附接到CM202，CM204或CM206横杆。或者，HD风监控器可以通过CM216传感器安装套件连接到我们不锈钢三脚架的顶部。
Wind Profile Studies
Wind profile studies measure many wind sensors. For these applications, the LLAC4 4-Channel Low Level AC Conversion Module can be used to increase the number of Wind Monitors measured by one data logger. The LLAC4 allows data logger control ports to read the wind speed sensor’s ac signals instead of using pulse channels. Data loggers compatible with the LLAC4 are the CR200(X) series (ac signal ≤1 kHz only), CR800, CR850, CR1000, CR3000, and CR5000.
数据记录器考虑因素
The 05108's propeller uses one pulse count channel on the data logger. Its wind vane requires one single-ended channel and access to an excitation channel. (The excitation channel can be shared with other high-impedance sensors.)
Programming
The 05108's propeller is measured by the PulseCount Instruction in CRBasic and by Instruction 3 (Pulse Count) in Edlog. The wind vane is measured by the BrHalf Instruction in CRBasic and by Instruction 4 (Excite-Delay-SE) in Edlog. The measurements are typically processed for output with the Wind Vector instruction (not present in the CR500 or CR9000 but present in the CR9000X).
视频和教程
Articles and Press Releases
Newsletter Articles
隐私政策更新
We've updated our privacy policy.Learn More