034B-ET.Wind Set for ET Station

Expand AllCollapse All

1. If a sensor automatically ships with a calibration sheet, what information is included on it?

   包括在校准片上的信息与每个传感器不同。对于某些传感器，纸张包含编程数据记录器所需的系数。对于其他传感器，校准表是通行/失败报告。

2. 坎贝尔科学传感器可用于坎贝尔科学传感器的不同电缆长度选择是什么？

   大多数坎贝尔科学传感器可作为-L提供，表示用户指定的电缆长度。如果传感器被列为-LX模型（其中“x”是其他字符），则该传感器的电缆具有用户指定的长度，但它终止具有唯一系统的特定连接器：

   • -LC模型具有用户指定的电缆长度，用于连接到ET107，CS110或REDIED METDATA1。
   • -LQ模型具有用户指定的电缆长度，用于连接到Raws-P气象站。

   如果传感器在主型号之后没有-L或其他-LX指定，则传感器具有设定的电缆长度。电缆长度在产品订购信息中的描述字段的末尾列出。例如，034B-ET模型的描述描述了“Met One Wind for Et Station，67英寸电缆。”。产品具有集合电缆长度终止，作为默认尾纤。

   If a cable terminates with a special connector for a unique system, the end of the model number designates which system. For example, the 034B-ET model designates the sensor as a 034B for an ET107 system.

   • –ET models terminate with the connector for an ET107 weather station.
   • -ETM模型与ET107气象站的连接器终止，但它们还包括特殊系统安装，这在购买替换部分时通常是方便的。
   • -QD模型终止于RAWS-F快速部署站的连接器。
   • -pw模型终止连接器，用于P运行或预先接收系统。
3. Where are the available cable termination options listed for a particular sensor?

   Not every sensor has different cable termination options. The options available for a particular sensor can be checked by looking in two places in the Ordering information area of the sensor product page:

   • 型号
   • Cable Termination Options list

   If a sensor is offered in an –ET, –ETM, –LC, –LQ, or –QD version, that option’s availability is reflected in the sensor model number. For example, the 034B is offered as the 034B-ET, 034B-ETM, 034B-LC, 034B-LQ, and 034B-QD.

   All of the other cable termination options, if available, are listed on the Ordering information area of the sensor product page under “Cable Termination Options.” For example, the 034B-L Wind Set is offered with the –CWS, –PT, and –PW options, as shown in the Ordering information area of the 034B-L product page.

   笔记：随着较新产品的添加到我们的库存中，通常，我们将在单个传感器模型下列出多个电缆终端选项，而不是创建多个型号。例如，HC2S3-L具有用于将其连接到CS110的-C电缆终端选项，而不是提供HC2S3-LC模型。

4. 如果原始校准表丢失，可以请另一种副本吗？

   这取决于校准表中包含的信息：

   • If the calibration sheet contains coefficient information, Campbell Scientific keeps a copy, and a replacement copy can be requested.
   • If the calibration sheet does not contain coefficients, Campbell Scientific does not keep a copy. It may be possible to contact the original manufacturer for a replacement copy.
5. What are the different cable termination options available for Campbell Scientific sensors?

   许多坎贝尔科学传感器可提供不同的电缆终端选项。这些选项包括以下内容：

   • The –PT (–PT w/Tinned Wires) option is the default option and does not display on the product line as the other options do. The cable terminates in pigtails that connect directly to a data logger.
   • 在-c（-c w / et / cs110连接器）选项中，电缆终止于连接到CS110电场仪表或ET系列气象站的连接器中。
   • 水煤浆(水煤浆w / CWS900连接器)选项,cable terminates in a connector that attaches to a CWS900-series interface. Connection to a CWS900-series interface allows the sensor to be used in a wireless sensor network.
   • 在-pw（-pw w / pre-wire连接器）选项中，电缆终止于连接到预先填充机箱的连接器中。
   • In the –RQ (–RQ w/RAWS Connector) option, the cable terminates in a connector that attaches to a RAWS-P Permanent Remote Automated Weather Station.

   笔记：电缆终端选项的可用性因传感器而异。例如，传感器可能没有，两个或多个选项可供选择。如果没有为特定传感器列出所需的选项，请联系Campbell Scientific进行帮助。